Rooftop Protection & Grease Containment
Exhaust Fan Super Hinge - Quick Fit Version - 12 inch coverage (set of 2 hinges)
Drain-Net Technologies
1 of 12
Part number
QF-18
Catalog price
$359.00 each
In stock
Product Highlights:- QF-18 (provides 12" of coverage)
- Proper Size of Fan Base 12"-18"
- One-man installation.
- Left and Right hinge included with all necessary hardware for installation
- Quick and easy to install (1 hour or less)
- Can be installed with the motor running
- Eliminates damage to fan during service and cleaning
- Reduces roof top grease discharge
- Reduces conduit and roof damage
- Lifetime warranty for service life of fan
- Made in the USA!
-
Proper exhaust fan cleaning. In order to thoroughly clean any commercial kitchen exhaust fan a sturdy hinging system must be installed to safely access all areas for proper cleaning. - Safety. Trying to remove a heavy exhaust fan from its duct for cleaning or maintenance is not only dangerous for the contractor but always causes some degree of damage to the roof or the fan housing.
- To protect the fan wiring. Exhaust fan wiring is stretched when the fan is taken off the stack and placed on the roof. Without a hinge kit, the fan wiring is subject to unnecessary abuse during cleaning and maintenance.
- To protect the exhaust fan. The exhaust fan can be damaged over time by removing it from the stack repeatedly and placing it on its side.
- To prevent roof damage. Rooftop damage and leaks can be the result of placing the exhaust fan on the roof during cleaning or maintenance.
- It’s the Law! NFPA 96 Code 8.1.1.1 states: “Approved up-blast fans with motors surrounded by the air stream shall be hinged, supplied with flexible weather proof electrical cable and service hold-open retainers, and listed for this use
Flyers
Click to view and download the Quick Fit Super Hinge Installation Insturctions
Product Video
Sizing Guide

When hinging larger fans with bases that exceed 36", or extremely heavy fans, it is strongly recommended to hinge the complete base of the fan and install our heavy duty chain support kit. 30" hinges and larger come with the HD-Chain Kit for additional support. If you purchase a hinge under 30" and would like an HD-Chain Kit for $35, please let us know.
We will not be held responsible for any damage to fan, duct, roof or injury to personnel if Hinge is installed improperly or mounted to a fan larger than what has been specified.

Catalog data is provided for technical reference. A Drain Specialist can confirm fit, availability, and the correct purchasing path before you order.
Not sure it fits?
We will confirm the fit before you order
Send the drain's measurements — or a photograph of it — and a Drain Specialist will confirm this part fits, or tell you which one does. Measuring takes a minute: remove the cover and measure across the top of the opening.
Specifications
| Why are exhaust fan hinge kits important? | Proper exhaust fan cleaning. In order to thoroughly clean any commercial kitchen exhaust fan a sturdy hinging system must be installed to safely access all areas for proper cleaning. Safety. Trying to remove a heavy exhaust fan from its duct for cleaning or maintenance is not only dangerous for the contractor but always causes some degree of damage to the roof or the fan housing. To protect the fan wiring. Exhaust fan wiring is stretched when the fan is taken off the stack and placed on the roof. Without a hinge kit, the fan wiring is subject to unnecessary abuse during cleaning and maintenanc |
|---|---|
| Flyers | Click to view and download the Quick Fit Super Hinge Installation Insturctions |
| Sizing Guide | When hinging larger fans with bases that exceed 36", or extremely heavy fans, it is strongly recommended to hinge the complete base of the fan and install our heavy duty chain support kit. 30" hinges and larger come with the HD-Chain Kit for additional support. If you purchase a hinge under 30" and would like an HD-Chain Kit for $35, please let us know. We will not be held responsible for any damage to fan, duct, roof or injury to personnel if Hinge is installed improperly or mounted to a fan larger than what has been specified. |
| Not sure what size you need? | Call for help: 908-236-0277 |
Configurations
Pricing shown exactly as supplied in the catalog.
| Configuration | Part # | Price |
|---|---|---|
| 18 inch (Fans 12-18 Inches) | QF-18 | $359.00 each |
| 24 inch (Fans 18-28 Inches) | QF-24 | $494.00 each |
| 30 inch (Fans 24-36 Inches) | QF-30 | $646.00 each |
| 36 inch (Fans 30-45 Inches) | QF-36 | $695.00 each |
| 42 inch (Fans 36-54 Inches) | QF-42 | $804.00 each |
Documents & Spec Sheets
Watch and Learn
Explore helpful videos about this product or topic.

